User Reported working SD cards (updated: 28th June 2021)Īll modern UHS-I U1 and U3 cards will generally work ok. IPod is now ready to restore & sync using iTunes. Slide battery cable in to the connector and push down the black latch to lock the ribbon in place. Once the foam has been attached, the iPod is ready to be closed up. Attach 2nd Foam on top of 1st foam if installing in to a thick back iPod.
Use 1 piece of foam for thin case back iPods. Place foam pad on the marked section on board.
#IFLASH DUAL INSTALL#
Install iFlash-Dual into iPod, making sure the ribbon is fully home and the black bar is locked down. Install SD cards in to iFlash-Dual – use socket SD1 if installing only 1 SD card.
iPod is ready to accept the iFlash board. Remove all rubber bumpers and strips from the iPods if any remain after the HDD is removed. Gently lift the black bar to release the ribbon from the HDD. Rest the front and back side by side, be careful to not cause too much stress on the headphone ribbon. I suggest watching some iPod opening videos on the internet.īefore pulling the case apart, release the battery cable – lift the black lock bar -or- gently using even pressure pull up the battery ribbon away from the connector. Using suitable tools, release the holding clips, making your way around the case till it opens.
0 kommentar(er)
